Installation Sheet

2.)
3.)
1.)
(A)Bracket (B)Ball Nuts
2Pcs
(D)Hex Nuts
3Pcs
(C)Mounting Screws
2Pcs
Step1:Remove mounting bracket from
fixture and install to electrical box.
A
A
C
B
C
(E)Glass
(F)Nipple (G)Metal Washer (H)Rubber Washer (I) Cap (J)Finial
IMPORTANT: Turn off the power at the main fuse or circuit breaker box before starting installation
Locate all hardware & components before discarding packaging
Cleaning & Care:
Page 2 of (2)
Clean with soft cloth and a mild detergent.
Do not use abrasive cleaner.
F
D
D
H
G
F
D
D
I
J
B
D
G
HE
I
D
J
B
Step2:Wire fixture to wires in outlet box.
Copper wire is for Ground. Attach canopy
to mounting bracket and tighten with ball
nuts。
E
Hexagon connector
Step2: Thread the nipple into Hexagon connector,
then secured by hex nut.Put the metal washer
and rubber washer on the nipple,adjust them
close to the glass diffuser by the hex nut ,then
put the glass diffuser on the shade spider, and
put the Cap close to the glass diffuser, then
secured by hex nut and finial.