Datasheet

Link master TS hardware. Contact TMG TE for more information. Santa Cruz was also verified using Balluff's IO-Link Device Tool
version 2.11.1, which comes with the purchase of the Balluff USB IO-Link master, part number BNI USB-901-000-A501. Contact
Balluff or one of their local distributors for ordering information. Download the IODD file (*.xml) located in the All Design Files
section at the end of this document and go to the Quick Start section below for step-by-step instructions on how to use the
software. Figure 3 shows a screen shot of the Balluff IO-Link Device Tool.
Figure 3. Balluff's IO-Link Device Tool version 2.11.1.
Detailed Description of Firmware
The Santa Cruz ships pre-programmed as a working IO-Link light sensor ready to connect to an IO-Link master. The firmware
targets a Renesas RL78 microcontroller and follows the simple flow chart shown in Figure 4. The firmware is written in C using
the IAR embedded workbench from IAR Systems and utilizes TMG TE's IO-Link device stack.
Page 4 of 11