Datasheet

(Typical Application Circuit, 50Ω system impedance, tuned for 315MHz to 433.92MHz operation, V
AVDD
= V
DVDD
= V
PAVDD
= +2.1V
to +3.6V, f
RF
= 300MHz to 450MHz, f
CRYSTAL
= 16MHz, T
A
= -40°C to +125°C, unless otherwise noted. Typical values are at V
AVDD
= V
DVDD
= V
PAVDD
= +2.7V, T
A
= +25°C, unless otherwise noted. All min and max values are 100% tested at T
A
= +125°C, and
guaranteed by design and characterization over temperature, unless otherwise noted.)
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
GENERAL CHARACTERISTICS
Frequency Range 300 450 MHz
Power-On Time t
ON
ENABLE transition low-to-high, frequency
settled to within 50kHz of the desired carrier
120
µs
ENABLE transition low-to-high, frequency
settled to within 5kHz of the desired carrier
260
Maximum Data Rate
ASK mode
Manchester encoded 50
kbps
Nonreturn-to-Zero 100
FSK mode
Manchester encoded 50
Nonreturn-to-Zero 100
Frequency Switching Time
Time from end of SPI write to frequency
settled to within 5kHz of desired carrier
70 µs
PHASE-LOCKED LOOP (PLL)
VCO Gain K
VCO
320 MHz/V
PLL Phase Noise
f
RF
= 315MHz
10kHz offset -78
dBc/Hz
1MHz offset -98
f
RF
= 433.92MHz
10kHz offset -73
1MHz offset -98
Loop Bandwidth 300 kHz
Reference Frequency Input Level 500 mV
P-P
Frequency-Divider Range 19 28
Frequency Deviation (FSK) ±2 ±100 kHz
CRYSTAL OSCILLATOR
Crystal Frequency f
XTAL
10.71 16 23.68 MHz
Frequency Pulling by V
DD
4 ppm/V
Crystal Load Capacitance (Note 4) 10 pF
POWER AMPLIFIER (PA)
Output Power (Note 1) P
OUT
T
A
= +25°C (Note 3) 3.8 9.2 16.4
dBm
T
A
= +125°C, V
AVDD
= V
DVDD
= V
PAVDD
=
+2.1V
2.4 5.2
T
A
= -40°C, V
AVDD
= V
DVDD
= V
PAVDD
=
+3.6V (Note 3)
12.6 17.0
Modulation Depth 71 dB
Maximum Carrier Harmonics
With output matching
network
f
RF
= 315MHz -29
dBc
f
RF
= 433.92MHz -44
Reference Spur -45 dBc
www.maximintegrated.com
Maxim Integrated │ 3
MAX7057 300MHz to 450MHz Frequency-Programmable
ASK/FSK Transmitter
AC Electrical Characteristics