Datasheet

ManualsBrandsMAXIM INTEGRATED ManualsDev KitsPCB design board

MAX7036 Evaluation Kit

Evaluates: MAX7036

For pricing, delivery, and ordering information, please contact Maxim Direct at

1-888-629-4642, or visit Maxim Integrated’s website at www.maximintegrated.com.

Component List

19-4533; Rev 1; 2/12

General Description

The MAX7036 evaluation kit (EV kit) provides a proven

design to evaluate the MAX7036 ASK receiver in a TQFN

package with an exposed pad. The EV kit enables test-

ing of the device’s RF performance and requires no

additional support circuitry. The RF input uses an SMA

connector for convenient connection to test equipment.

The MAX7036 EV kit is available in two versions,

315MHz (MAX7036EVKIT315+) and 433.92MHz

(MAX7036EVKIT433+). The passive components are

optimized for these frequencies. The EV kit PCBs come

with a MAX7036GTP/V+ installed on both EV kit versions.

Features

S Lead(Pb)-Free and RoHS Compliant

S Proven PCB Layout

S Proven Components List

S Available in 315MHz and 433.92MHz Versions

S Fully Assembled and Tested

Ordering Information

+Denotes lead(Pb)-free and RoHS compliant.

PART TYPE

MAX7036EVKIT-315+ EV Kit

MAX7036EVKIT-433+ EV Kit

DESIGNATION QTY DESCRIPTION

C1, C9, C13,

C20

0.1FF ±10%, 16V X7R ceramic

capacitors (0603)

Murata GRM188R71C104K

C2, C17 0 Not installed, capacitors (0603)

C3, C16 2

315MHz: 4.7pF ±5%, 50V C0G

ceramic capacitors (0603)

Murata GRM1885C1H4R7C

433.92MHz: 10pF ±5%, 50V C0G

ceramic capacitors (0603)

Murata GRM1885C1H100J

C4 1

1FF ±10%, 6.3V X5R ceramic

capacitor (0603)

Murata GRM188R60J105K

C5 1

180pF ±10%, 50V C0G ceramic

capacitor (0603)

Murata GRM1885C1H181J

C6 1

22pF ±5%, 50V C0G ceramic

capacitor (0603)

Murata GRM1885C1H220J

C7, C8, C11,

C14, C15

100pF ±5%, 50V C0G ceramic

capacitors (0603)

Murata GRM1885C1H101J

C10, C12 2

0.01FF ±10%, 25V X7R ceramic

capacitors (0603)

Murata GRM188R71E103K

C18 1

390pF ±5%, 50V C0G ceramic

capacitor (0603)

Murata GRM1885C1H391J

DESIGNATION QTY DESCRIPTION

C19 1

315MHz: 4.7pF ±5%, 50V C0G

ceramic capacitor (0603)

Murata GRM1885C1H4R7C

433.92MHz: 2.7pF ±0.1pF, 50V

C0G ceramic capacitor (0603)

Murata GRM1885C1H2R7B

C21 1

10pF ±5%, 50V C0G ceramic

capacitor (0603)

Murata GRM1885C1H100J

C22 1

10FF ±20%, 6.3V X5R ceramic

capacitor (0603)

Murata GRM188R60J106M

C23 1

220pF ±10%, 50V X7R ceramic

capacitor (0603)

Murata GRM188R71H221K

JU1, JU3 2 2-pin headers

JU2, JU4 2 3-pin headers

L1 1

315MHz: 100nH ±2% inductor (0603)

Murata LQW18ANR10G00

433.92MHz: 47nH ±2% inductor

(0603)

Murata LQW18AN47NG00

L2 1

315MHz: 27nH ±2% inductor (0603)

Murata LQW18AN27NG00

433.92MHz: 15nH ±2% inductor

(0603)

Murata LQW18AN15NG00

Summary of content (7 pages)

PAGE 1
MAX7036 Evaluation Kit Evaluates: MAX7036 General Description The MAX7036 evaluation kit (EV kit) provides a proven design to evaluate the MAX7036 ASK receiver in a TQFN package with an exposed pad. The EV kit enables testing of the device’s RF performance and requires no additional support circuitry. The RF input uses an SMA connector for convenient connection to test equipment. The MAX7036 EV kit is available in two versions, 315MHz (MAX7036EVKIT315+) and 433.92MHz (MAX7036EVKIT433+).
PAGE 2
MAX7036 Evaluation Kit Evaluates: MAX7036 Component List (continued) DESIGNATION QTY P1 1 SMA end-launch jack receptacle P2 1 SMA female vertical-mount PCB connector R1 1 22kI ±5% resistor (0603) R2 0 Not installed, resistor (0603) TP1–TP4 4 Miniature red test points 1 ASK receiver (20 TQFN-EP*) Maxim MAX7036GTP/V+ U1 DESCRIPTION DESIGNATION Y1 QTY 1 DESCRIPTION 315MHz: 9.8375MHz crystal (AT-51CD2) NDK EXS00A-AT00733 433.92MHz: 13.
PAGE 3
MAX7036 Evaluation Kit Evaluates: MAX7036 Table 1. Jumper Table (JU1–JU4) JUMPER SHUNT POSITION JU1 Open Closed* JU2 JU3 JU4 1-2* 2-3 Open* DESCRIPTION Disconnects AVDD and DVDD from VDD. Apply up to 5V on the VDD pad. An internal regulator provides power to AVDD and DVDD. Connects AVDD and DVDD to VDD. When connected, do not exceed 3.3V on the VDD pad. Connects ENABLE to VDD (normal operation) Connects ENABLE to GND (shutdown) Always keep open. Provides a test point for the IF signal.
PAGE 4
MAX7036 Evaluation Kit Evaluates: MAX7036 Figure 1.
PAGE 5
MAX7036 Evaluation Kit Evaluates: MAX7036 Figure 2.
PAGE 6
MAX7036 Evaluation Kit Evaluates: MAX7036 Figure 3. MAX7036 EV Kit Component Placement Guide— Component Side Figure 4. MAX7036 EV Kit PCB Layout—Component Side Figure 5.
PAGE 7
MAX7036 Evaluation Kit Evaluates: MAX7036 Revision History REVISION NUMBER REVISION DATE 0 4/09 Initial release 1 2/12 Updated IC part number and the Additional Evaluation section DESCRIPTION PAGES CHANGED — 1, 2 Maxim Integrated cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim Integrated product. No circuit patent licenses are implied. Maxim Integrated reserves the right to change the circuitry and specifications without notice at any time.