Datasheet

Note 1: Production testing done at T
A
= +25°C; limits over temperature guaranteed by design only.
Note 2: RESET output for MAX6711/MAX6713; RESET output for MAX6712.
(V
CC
= full range, T
A
= -40°C to +125°C, unless otherwise noted. Typical values are at V
CC
= +5V for L/M versions, V
CC
= +3.3V for
T/S versions, V
CC
= +3V for R version, V
CC
= +2.5V for Z version, and T
A
= +25°C.) (Note 1)
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
RESET Output-Voltage Low
(MAX6711/MAX6713)
VOL
VCC = VTH min, ISINK = 1.2mA,
MAX6711R/S/T/Z, MAX6713R/S/T/Z
0.3
V
VCC = VTH min, ISINK = 3.2mA,
MAX6711L/M, MAX6713L/M
0.4
VCC > 1.0V, ISINK = 50µA 0.3
RESET Output-Voltage High
(MAX6711)
VOH
VCC > VTH max, ISOURCE = 500µA,
MAX6711R/S/T/Z
0.8 x VCC
V
VCC > VTH max, ISOURCE = 800µA,
MAX6711L/M
VCC x 1.5
RESET Output-Voltage Low
(MAX6712)
VOL
VCC = VTH max, ISINK = 1.2mA,
MAX6712R/S/T/Z
0.3
V
VCC = VTH max, ISINK = 3.2mA, MAX6712L/M 0.4
RESET Output-Voltage High
(MAX6712)
VOH 1.8V < VCC < VTH min, ISOURCE = 150µA 0.8 x VCC V
RESET Open-Drain Output-
Leakage Current
VCC > VTH, RESET deasserted 1 µA
MR Input Threshold
VIL 0.3 x VCC
V
VIH 0.7 x VCC
MR Pull-Up Resistance 10 20 kW
MR Minimum Pulse Width 1 µs
MR Glitch Immunity 100 ns
MR to Reset Delay 200 ns
www.maximintegrated.com
Maxim Integrated │ 3
MAX6711L/M/R/S/T/Z,
MAX6712L/M/R/S/T/Z,
MAX6713L/M/R/S/T/Z
4-Pin SC70 Microprocessor
Reset Circuits with Manual Reset Input
Electrical Characteristics (continued)