Datasheet

Terminal Voltage (with respect to GND)
V
CC
.......................................................................-0.3V to +6.0V
RESET, RESET (push-pull) ...................... -0.3V to (V
CC
+ 0.3V)
RESET (open drain) .............................................-0.3V to +6.0V
MR ............................................................ -0.3V to (V
CC
+ 0.3V)
Input Current, V
CC
, MR ......................................................20mA
Output Current, RESET, RESET ........................................ 20mA
Rate of Rise, V
CC
..........................................................100V/µs
Continuous Power Dissipation (T
A
= +70°C)
4-Pin SC70 (derate 3.1mW/°C above +70°C) .............245mW
Operating Temperature Range ......................... -40°C to +125°C
Storage Temperature Range ............................ -65°C to +150°C
Lead Temperature (soldering, 10s) .................................+300°C
(V
CC
= full range, T
A
= -40°C to +125°C, unless otherwise noted. Typical values are at V
CC
= +5V for L/M versions, V
CC
= +3.3V for
T/S versions, V
CC
= +3V for R version, V
CC
= +2.5V for Z version, and T
A
= +25°C.) (Note 1)
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
VCC Range
TA = 0°C to +70°C 1.0 5.5
V
TA = -40°C to +105°C 1.2 5.5
Supply Current ICC
TA = -40°C to
+85°C
VCC < 5.5V, MAX671_L/M 16 35
µA
VCC < 3.6V, MAX671_R/S/T/Z 12 30
TA = +85°C to
+105°C
VCC < 5.5V, MAX671_L/M 75
VCC < 3.6V, MAX671_R/S/T/Z 75
Reset Threshold VTH
MAX671_L
TA = +25°C 4.56 4.63 4.70
V
TA = -40°C to +85°C 4.50 4.75
TA = +85°C to +105°C 4.40 4.86
MAX671_M
TA = +25°C 4.31 4.38 4.45
TA = -40°C to +85°C 4.25 4.50
TA = +85°C to +105°C 4.16 4.56
MAX671_T
TA = +25°C 3.04 3.08 3.11
TA = -40°C to +85°C 3.00 3.15
TA = +85°C to +105°C 2.92 3.23
MAX671_S
TA = +25°C 2.89 2.93 2.96
TA = -40°C to +85°C 2.85 3.00
TA = +85°C to +105°C 2.78 3.08
MAX671_R
TA = +25°C
TA = -40°C to +85°C
TA = +85°C to +105°C
2.59 2.63 2.66
2.55 2.70
2.50 2.76
MAX671_Z
TA = +25°C 2.28 2.32 2.35
TA = -40°C to +85°C 2.25 2.38
TA = +85°C to +105°C 2.21 2.45
Reset-Threshold Tempco 30 ppm/°C
VCC to Reset Delay (Note 2) VCC = VTH to (VTH - 100 mV) 20 µs
Reset Active Timeout Period
TA = -40°C to +85°C 140 240 460
ms
TA = +85°C to +125°C 100 840
www.maximintegrated.com
Maxim Integrated │ 2
MAX6711L/M/R/S/T/Z,
MAX6712L/M/R/S/T/Z,
MAX6713L/M/R/S/T/Z
4-Pin SC70 Microprocessor
Reset Circuits with Manual Reset Input
Electrical Characteristics
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these
or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect
device reliability.
Absolute Maximum Ratings