Datasheet

Evaluates: MAX5550/MAX5548
Evaluating with Both SPI and I
2
C
Interfaces
Click on Options | Switch Interface SPI/I2C to change
the interface type. Press the appropriate SPI or I2C but-
ton located on the Interface Selection window (Figure
3) to configure the EV kit for the desired interface.
When using and selecting the I2C option, verify that
there is a valid address in the I2C Slave Address
combo box before pressing the Close button.
MAX5550 Evaluation Kit
6 _______________________________________________________________________________________
Figure 2. MAX5550 EV Kit Software Main Window (Operating Modes Tab)
Figure 3. MAX5550 EV Kit Interface Selection Window