Datasheet

MAX5417/MAX5418/MAX5419
256-Tap, Nonvolatile, I
2
C-Interface,
Digital Potentiometers
2 _______________________________________________________________________________________
ABSOLUTE MAXIMUM RATINGS
ELECTRICAL CHARACTERISTICS
(V
DD
= +2.7V to +5.25V, H = V
DD
, L = GND, T
A
= -40°C to +85°C, unless otherwise noted. Typical values are at V
DD
= +5V, T
A
= +25°C.)
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
V
DD
to GND...........................................................-0.3V to +6.0V
All Other Pins to GND.................................-0.3V to (V
DD
+ 0.3V)
Maximum Continuous Current into H, L, and W
MAX5417......................................................................±1.3mA
MAX5418......................................................................±0.6mA
MAX5419......................................................................±0.3mA
Continuous Power Dissipation (T
A
= +70°C)
8-Pin TDFN (derate 24.4mW/°C above +70°C) .........1951mW
Operating Temperature Range ...........................-40°C to +85°C
Junction Temperature......................................................+150°C
Storage Temperature Range .............................-60°C to +150°C
Lead Temperature (soldering, 10s) .................................+300°C
Soldering Temperature (reflow) .......................................+260°C
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
DC PERFORMANCE (VOLTAGE-DIVIDER MODE)
Resolution 256 Taps
Integral Nonlinearity INL (Note 1) ±0.5 LSB
Differential Nonlinearity DNL (Note 1) ±0.5 LSB
End-to-End Temperature
Coefficient
TC
R
35 ppm/°C
Ratiometric Temperature
Coefficient
5 ppm/°C
MAX5417_, 50 -0.6
MAX5418_, 100k -0.3Full-Scale Error
MAX5419_, 200k -0.15
LSB
MAX5417_, 50k 0.6
MAX5418_, 100k 0.3
Zero-Scale Error
MAX5419_, 200k 0.15
LSB
DC PERFORMANCE (VARIABLE-RESISTOR MODE)
V
DD
= 3V ±3
Integral Nonlinearity
(Note 2)
INL
V
DD
= 5V ±1.5
LSB
V
DD
= 3V, MAX5417_, 50k -1 +2
V
DD
= 3V, MAX5418_, 100k ±1
V
DD
= 3V, MAX5419_, 200k ±1
Differential Nonlinearity
(Note 2)
DNL
V
DD
= 5V ±1
LSB
DC PERFORMANCE (RESISTOR CHARACTERISTICS)
Wiper Resistance R
W
V
DD
= 3V to 5.25V (Note 3) 325 675
Wiper Capacitance C
W
10 pF
MAX5417_ 37.5 50 62.5
MAX5418_ 75 100 125
End-to-End Resistance R
HL
MAX5419_ 150 200 250
k