Datasheet

MAX534
6 _______________________________________________________________________________________
______________________________________________________________Pin Description
PIN
DAC B Voltage OutputOUTB1
FUNCTIONNAME
DAC A Voltage OutputOUTA2
Software-Programmable Logic OutputUPO4
Reference-Voltage InputREF3
Load DAC Input (active low). Driving this asynchronous input low (level sensitive) transfers the contents
of each input latch to its respective DAC latch.
LDAC
6
Serial Data Output. Sinks and sources current. Data at DOUT can be clocked out on the rising or falling
edge of SCLK (Table 1).
DOUT8
Clear DAC Input (active low). Driving CLR low asynchronously clears the input and DAC registers, and
sets all DAC outputs to zero.
CLR
7
Power-Down Enable. Must be high to allow software shutdown mode.PDE5
Serial Clock Input. Data is clocked in on the rising edge and clocked out on the falling (default) or rising
edge (A0 = A1 = 1, see Table 1).
SCLK10
Digital GroundDGND12
Serial Data Input. Data is clocked in on the rising edge of SCLK.DIN11
Analog GroundAGND14
DAC C Voltage OutputOUTC16
DAC D Voltage OutputOUTD15
Power Supply, +4.5V to +5.5VV
DD
13
Chip-Select Input (active low). Data is shifted in and out when CS is low. Programming commands are
executed when CS returns high.
CS
9
+5V, Low-Power, 8-Bit Quad DAC
with Rail-to-Rail Output Buffers