Datasheet

_________________________________________________________________ Maxim Integrated Products 5
MAX5216 Evaluation Kit
Evaluates: MAX5214/MAX5216
Setting the Reference
The reference is set to 3.3V by default. Uncheck the
Default REF checkbox and enter the new reference volt-
age in the corresponding edit box. The user must apply
the same voltage at the board for proper operation (see
the Reference section). The voltage entered in the edit
box does not affect the operation of the part.
CLEAR (CLR)
Press the CLEAR button to drive CLR low and reset the
DAC code to 0.
Figure 3. MAX5216 EV Kit Software Main Window (Power-Down Mode)