Datasheet

MAX4711/MAX4712/MAX4713
The COM_ pins do not have fault protection. Reverse
ESD-protection diodes are internally connected
between COM_, and V+ and V-. If a signal on COM_
exceeds V+ or V- by more than a diode drop, one of
these diodes will conduct. The IN_ pin can exceed the
positive supply voltage, but they can go below the neg-
ative supply by only a diode drop. The maximum volt-
age on these pins is 12V if operating from a single
supply, regardless of the supply voltage (including 0
volts), and if operating from dual supplies, the maxi-
mum voltage is (V- + 12V).
Fault-Protection Voltage and Power Off
The maximum fault voltage on the NC_ or NO_ pins is
±12V with power off.
IN_ Logic-Level Thresholds
The logic-level thresholds are CMOS and TTL compati-
ble when using ±4.5V to ±5.5V or single +4.5V to +11V
supplies. When using a +2.7V supply, the logic thresh-
olds are V
IH
= 2.0V and V
IL
= 0.6V.
Dual Supplies
The MAX4711/MAX4712/MAX4713 operate with bipolar
supplies between ±2.7V and ±5.5V. The V+ and V-
supplies need not be symmetrical, but their difference
should not exceed 11V.
Single Supply
The MAX4711/MAX4712/MAX4713 operate from a sin-
gle supply between +2.7V and +11V when V- is con-
nected to GND.
Chip Information
TRANSISTOR COUNT: 463
Fault-Protected, Low-Voltage,
Quad SPST Analog Switches
12 ______________________________________________________________________________________
SWITCHES SHOWN FOR LOGIC "0" INPUT
DIP/SO/TSSOP
MAX4712
LOGIC SWITCH
0
1
OFF
ON
TOP VIEW
DIP/SO/TSSOP
MAX4713
LOGIC
SWITCHES
1, 4
0
1
OFF
ON
SWITCHES
2, 3
ON
OFF
16
15
14
13
12
11
10
9
1
2
3
4
5
6
7
8
IN2
COM2
NC2
V+
V-
NO1
COM1
IN1
MAX4713
N.C.
NC3
COM3
IN3
IN4
COM4
NO4
GND
16
15
14
13
12
11
10
9
1
2
3
4
5
6
7
8
IN2
COM2
NO2
V+
V-
NO1
COM1
IN1
MAX4712
N.C.
NO3
COM3
IN3
IN4
COM4
NO4
GND
Pin Configurations/Functional Diagrams/Truth Tables (continued)
PART TEMP RANGE
PIN-PACKAGE
MAX4712CUE
0°C to +70°C 16 TSSOP
MAX4712CSE
0°C to +70°C 16 Narrow SO
MAX4712CPE
0°C to +70°C 16 Plastic Dip
MAX4712EUE
-40°C to +85°C 16 TSSOP
MAX4712ESE
-40°C to +85°C 16 Narrow SO
MAX4712EPE
-40°C to +85°C 16 Plastic Dip
MAX4713CUE
0°C to +70°C 16 TSSOP
MAX4713CSE
0°C to +70°C 16 Narrow SO
MAX4713CPE
0°C to +70°C 16 Plastic Dip
MAX4713EUE
-40°C to +85°C 16 TSSOP
MAX4713ESE
-40°C to +85°C 16 Narrow SO
MAX4713EPE
-40°C to +85°C 16 Plastic Dip
Ordering Information (continued)