Datasheet

Select C
FILTER
For SFP/SFF, FDDI, 155Mbps ATM LAN, Fast Ethernet,
and ESCON receivers, Maxim recommends C
FILTER
=
0.01µF. This capacitor value ensures chatter-free
LOS/SD and provides a typical assert/deassert time of
10µs. For other applications, the value of C
FILTER
can
be calculated using the following equation:
C
FILTER
= τ / 825Ω
where τ is the desired time constant of the power detector.
Select C
AZ
and C
IN
External-coupling capacitors (C
IN
) are required on the
data inputs for the offset correction loop to function
properly. The offset correction loop bandwidth is deter-
mined by the external capacitor (C
AZ
) connected
between CZP and CZN. The poles associated with C
IN
and C
AZ
must work together to provide a flat response
at the lower -3dB corner frequency. For SFP/SFF, FDDI,
155Mbps ATM LAN, Fast Ethernet, and ESCON
receivers, Maxim recommends the following:
C
IN
= 4700pF
C
AZ
= 1µF
MAX3969
200Mbps SFP Limiting Amplifier
_______________________________________________________________________________________ 7
V
CCO
OUT-
OUT+
ESD
STRUCTURES
Figure 2. Equivalent PECL Output Circuit
LOS/LOS
ESD
STRUCTURES
V
CCO
Figure 3. Equivalent TTL Output Circuit
PIN-TIA RESPONSIVITY = G
1.8dB
2.5dB
10 log(OPTICAL POWER)
20 log(V
IN
)
RX_MAX (SENSITIVITY)
SD HIGH / LOS LOW
SD LOW / LOS HIGH
5dB
3.6dB
V
IN_TH
V
IN_SEN
Figure 4. Signal Levels for Power-Detect Threshold