Datasheet

Supply Voltage, V
CC
............................................-0.5V to +6.0V
Voltage at LOS_, CIM_, and RMOD_ ...... -0.5V to (V
CC
+ 0.5V)
Voltage at EIN_+, EIN_-,
DIN_+, and DIN_- .............................(V
CC
- 1V) to (V
CC
+ 0.5V)
Current Out of EOUT_+, EOUT_-,
DOUT_+, and DOUT_- ................................................... 25mA
Continuous Power Dissipation (T
A
= +70°C)
68-Pin TQFN (derate 50mW/°C above +70°C) ..................4W
Operating Ambient Temperature Range ................. 0°C to +85°C
Storage Ambient Temperature Range .............. -55°C to +150°C
Lead Temperature (soldering, 10s) .................................+300°C
(V
CC
= 3.14V to 3.46V, T
A
= 0°C to +85°C. Typical values are at V
CC
= 3.3V and T
A
= +25°C, unless otherwise noted.)
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
Supply Current I
CC
Includes external load current (Note 1) 220 345 mA
CABLE DRIVER INPUT SPECIFICATIONS
Input Voltage
(Single Ended)
V
DIN_
+,
V
DIN_
-
V
CC
-
0.6
V
CC
+
0.2
V
Input Voltage (Differential) V
DIN_
400 1100 mV
P-P
Input Impedance Single ended 40 50 60 Ω
CABLE DRIVER OUTPUT SPECIFICATIONS
Output Voltage (Differential)
RMOD_ = 10kΩ (Note 2) 750 825 1000
mV
P-P
RMOD_ = 20kΩ (Note 2) 400 445 550
Output Impedance Single ended 50 62.5 75 Ω
CABLE EQUALIZER INPUT SPECIFICATIONS
Minimum Cable Input (Differential) 3.2Gbps, 30dB cable loss (Note 3) 400 mV
P-P
Maximum Cable Input (Differential) 600 mV
P-P
Input Impedance 40 50 60 Ω
CABLE EQUALIZER OUTPUT SPECIFICATIONS
Output Voltage (Differential) (Note 2) 500 1000 mV
P-P
Output Impedance Single ended 50 62.5 75 Ω
Voltage at LOS_
Output high (Note 4) 2.4
V
Output low (Note 4) 0.4
MAX3802 3.2Gbps Quad Adaptive Cable Equalizer
with Cable Driver
www.maximintegrated.com
Maxim Integrated │ 2
Absolute Maximum Ratings
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these
or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect
device reliability.
DC Electrical Characteristics