Datasheet

Voltage Referenced to V-
V+............................................................................ -0.3V, 44V
GND........................................................................ -0.3V, 25V
Digital Inputs, A_, EN_, NO, COM
(Note 1)............................................(V- - 0.3V) to (V+ + 0.3V)
or 30mA (whichever occurs first)
Continuous Current (any terminal)..................................... 30mA
Peak Current, NO or COM
(pulsed at 1ms, 10% duty cycle max).......................... 100mA
Continuous Power Dissipation (T
A
= +70 °C)
Plastic DIP (derate 14.29mW/°C above +70°C)........... 1.14W
Plastic DIP (derate 14.30,W/°C above +70°C)......1142.90mW
TSSOP (derate 12.80mW/°C aboce +70°C).........1025.60mW
Wide SO (derate 12.50mW/°C above +70°C)................1.00W
SSOP (derate 9.10mW/°C above +70°C)..................727.3mW
CERDIP (derate 16.67mW/°C above +70°C).................1.33W
Operating Temperature Ranges
MAX336C_I/MAX337C_I.....................................0°C to +70°C
MAX336E_I/MAX337E_I..................................-40°C to +85°C
MAX336MJI/MAX337MJI...............................-55°C to +125°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10sec) .............................+300°C
Soldering Temperature (reflow)....................................... +260°C
(V+ = +15V, V- = -15V, GND = 0V, V
AH
= +2.4V, V
AL
= +0.8V, T
A
= T
MIN
to T
MAX
, unless otherwise noted.)
PARAMETER SYMBOL CONDITIONS
MIN TYP MAX
UNITS
(Note 2)
SWITCH
Analog Signal Range V
NO
, V
COM
(Note 3) -15 15 V
On-Resistance R
ON
I
NO
= 0.2mA,
V
COM
= ±10V
T
A
= +25 °C 220 400
Ω
T
A
= T
MIN
to T
MAX
500
On-Resistance Matching
Between Channels
∆R
ON
I
NO
= 0.2mA,
V
COM
= ±10V (Note 4)
T
A
= +25 °C 5 10
Ω
T
A
= T
MIN
to T
MAX
15
NO-Off Leakage Current
(Note 5)
I
NO(OFF)
V
COM
= ±10V,
V
NO
= ±10V, V
EN
= 0V
T
A
= +25 °C -0.02 0.001 0.02
nA
T
A
= T
MIN
to T
MAX
C, E -1.25 1.25
M -20 20
COM-Off Leakage Current
(Note 5)
I
COM(OFF)
V
NO
=±10V,
V
COM
= ±10V,
V
EN
= 0V
MAX336
T
A
= +25 °C -0.05 0.05
nA
T
A
= T
MIN
to T
MAX
C, E -6.5 6.5
M -80 80
V
NO
= ±10V,
V
COM
= ±10V,
V
EN
= 0V
MAX337
T
A
= +25 °C -0.05 0.05
T
A
= T
MIN
to T
MAX
C, E -3.25 3.25
M -40 40
COM-On Leakage Current
(Note 5)
I
COM(ON)
V
COM
= ±10V,
V
NO
= ±10V,
sequence
each switch
on
MAX336
T
A
= +25 °C -0.05 0.05
nA
T
A
= T
MIN
to T
MAX
C, E -6.5 6.5
M -80 80
MAX337
T
A
= +25 °C -0.05 0.05
T
A
= T
MIN
to T
MAX
C, E -3.25 3.25
M -40 40
MAX336/MAX337 16-Channel/Dual 8-Channel,
Low-Leakage, CMOS Analog Multiplexers
www.maximintegrated.com
Maxim Integrated │ 2
Note 1: Signals on any terminal exceeding V+ or V- are clamped by internal diodes. Limit forward current to maximum current rating.
Absolute Maximum Ratings
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these
or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect
device reliability.
Electrical Characteristics—Dual Supplies