Datasheet

MAX2612–MAX2616
40MHz to 4GHz Linear Broadband Amplifiers
2Maxim Integrated
V
CC
,EN/RBIAS, RFOUT to GND .........................-0.3V to +6.0V
Maximum Input Power (RFIN) ....................................... +20dBm
Continuous Power Dissipation (T
A
= +70NC)
TDFN (derates 16.7mW/NC above +70NC) ............. 1333.3mW
Operating Temperature Range .......................... -40NC to +85NC
Junction Temperature .....................................................+150NC
Storage Temperature Range ............................ -65NC to +160NC
Lead Temperature (soldering, 10s) ................................+300NC
Soldering Temperature (reflow) ......................................+260NC
TDFN
Junction-to-Ambient Thermal Resistance (B
JA
) ..........60NC/W Junction-to-Case Thermal Resistance (B
JC
) ...................11NC/W
ABSOLUTE MAXIMUM RATINGS
Note 1: Package thermal resistances were obtained using the method described in JEDEC specification JESD51-7, using a four-layer
board. For detailed information on package thermal considerations, refer to www.maximintegrated.com/thermal-tutorial.
PACKAGE THERMAL CHARACTERISTICS (Note 1)
DC ELECTRICAL CHARACTERISTICS
(MAX2612/MAX2613/MAX2614/MAX2615/MAX2616 EV Kit, V
CC
= +5.0V, no RF input signals at RFIN, T
A
=-40NC to +85NC, unless
otherwise noted. Typical values are at V
RFOUT
= +5V, T
A
= +25NC, unless otherwise noted.) (Note 2)
AC ELECTRICAL CHARACTERISTICS
(MAX2612/MAX2613/MAX2614/MAX2615/MAX2616 EV Kit, V
CC
= +5V, T
A
= -40NC to +85NC, unless otherwise noted. Typical values
are at V
RFOUT
= +5V, T
A
= +25NC, unless otherwise noted.) (Note 2)
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional opera-
tion of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
PARAMETER CONDITIONS MIN TYP MAX UNITS
Supply Voltage DC voltage at RFOUT 3 5 5.25 V
Supply Current
MAX2612 69
mA
MAX2613 51.2
MAX2614 40.6
MAX2615, R
BIAS
= 21.5kI
81.5
MAX2616 80.6
Shutdown Supply Current EN logic-low 7
FA
RBIAS Minimum MAX2615 10
kI
PARAMETER CONDITIONS MIN TYP MAX UNITS
RFIN Frequency Range 40 4000 MHz
Power Gain
f
RFIN
= 1000MHz
(Note 3)
MAX2612 18.3
dB
MAX2613 18.6
MAX2614 18.6
MAX2615 18.5
MAX2616 18.4
f
RFIN
= 4000MHz
(Note 3)
MAX2612 17.5
MAX2613 18.1
MAX2614 17.5
MAX2615 18.0
MAX2616 18.0