Datasheet

Evaluates: MAX17094
MAX17094 Evaluation Kit
_______________________________________________________________________________________ 7
Figure 2. Command Module Interface Window
Table 6. SMBus Commands
CONTROL
SMBus
COMMAND
FORMAT
Load DAC SMBusWriteByte
Input the desired 7-bit DAC setting into the Data Out combo box. The 7-bit DAC value should
be stored in the lower 7 bits (b6–b0) of the byte; the MSB is ignored.
Read DAC SMBusReadByte
Receives 8 bits from the device. The lower 7 bits correspond to the current DAC setting and
the MSB is ignored.
Device
search
SMBusQuick
Search for device address shown in the Target Device Address combo box. The MAX17094
device address can be 50, 52, 54, or 56.