Datasheet

MAX17079
4-Level or 2-Level Logic to High-Voltage
Level Shifter for TFT LCD TV Display
2 _______________________________________________________________________________________
ABSOLUTE MAXIMUM RATINGS
ELECTRICAL CHARACTERISTICS
(Circuit of Figure 1, V
VCC
= 3.3V, V
VLS
= 15V, V
VH1
= 10V, V
VH2
= 7V, V
VCOM
= 6V, V
VL2
= 5V, V
VL1
= 2V, T
A
= -40°C to +105°C.
Typical values are at T
A
= +25°C, unless otherwise noted.) (Note 1)
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
VCC to AGND...........................................................-0.3V to +7V
Ax, Bx, CH, ST, EN to AGND....................................-0.3V to +7V
DGND to AGND.....................................................-0.3V to +0.3V
VLS to DGND..........................................................-0.3V to +20V
VH1, VH2, VL1, VL2, VCOM to DGND ........-0.3V to (V
LS
+ 0.3V)
OAx, OBx to DGND ..........................(V
L1
- 0.3V) to (V
H1
+ 0.3V)
OBx, OAx RMS Current.......................................................50mA
VH1, VH2, VL1, VL2 RMS Current.....................................300mA
VH2, VL2, VCOM, to DGND.............(VL1 - 0.3V) to (VH1 + 0.3V)
Continuous Power Dissipation (T
A
= +70°C)
40-Pin, 6mm x 6mm TQFN
(derate 35.7mW/°C above +70°C) .........................2857.1mW
Operating Temperature Range .........................-40°C to +105°C
Junction Temperature......................................................+150°C
Storage Temperature Range .............................-65°C to +150°C
Soldering Temperature (soldering, 10s) ..........................+300°C
Soldering Temperature (reflow) .......................................+260°C
PARAMETER CONDITIONS MIN TYP MAX UNITS
GENERAL
VCC Input Voltage Range 2.3 3.6 V
VCC Input Undervoltage Lockout Rising edge, 200mV typical hysteresis 1.8 2.0 2.2 V
VLS Input Voltage Range 10 18 V
VLS Input Undervoltage Lockout Rising edge, 500mV typical hysteresis 8.0 8.5 9.0 V
VH1 Input Voltage Range 4 V
VLS
V
VH2 Input Voltage Range 0 V
VLS
- 4 V
VL2 Input Voltage Range 0 V
VLS
- 4 V
VL1 Input Voltage Range 0 V
VLS
- 4 V
VCOM Input Voltage Range 4 V
VLS
- 4 V
VCC Quiescent Current 50 μA
VLS Quiescent Current All channels in STATE 2 300 μA
VH1 Quiescent Current All channels in STATE 1 or STATE 3 150 μA
VH2 Quiescent Current All channels in STATE 2 or STATE 4 -125 μA
VL1 Quiescent Current All channels in STATE 1 or STATE 3 -90 μA
VL2 Quiescent Current All channels in STATE 2 or STATE 4 -130 μA
INPUTS AND OUTPUTS
Logic-Input Low Voltage EN, CH, ST, Ax, Bx
0.3 x
V
VCC
V
Logic-Input High Voltage EN, CH, ST, Ax, Bx
0.7 x
V
VCC
V
Logic-Low Input Current EN, CH, ST, Ax, Bx to AGND -1 +1 μA
Logic-High Input Current VCC to EN, CH, ST, Ax, Bx 10.0 16.5 30.0 μA
VH1 - OAx, VH1 - OBx
On-Resistance
V
VLS
= 10V, V
VH1
= 5V,
I
(OAx, OBx)
= 20mA
3 
VH2 - OAx, VH2 - OBx
On-Resistance
V
VLS
= 10V, V
VH2
= 5V,
I
(OAx, OBx)
= 20mA
3 