Datasheet

Evaluates: MAX17062
Positive Charge-Pump
Configuration
As configured, the single-stage positive charge pump
generates approximately double the VOUT output voltage
at VGON. The charge pump can be reconfigured as a
two-stage positive charge pump, providing triple the
VOUT output voltage at VGON. This is accomplished by
installing capacitors C13, C16, diode D3, and removing
resistor R7. See Table 3 for suggested component values.
MAX17062 Evaluation Kit
4 _______________________________________________________________________________________
Table 3. Two-Stage Charge-Pump
Components
DESIGNATION QTY DESCRIPTION
C13, C16 2
0.1µF ±10%, 50V X7R ceramic
capacitors (0603)
D3 1
250mA, 90V dual ultra-fast diode
(SOT23)
R7 0 Not installed, resistor