Datasheet

MAX1452 Evaluation Kit
To expedite the development of MAX1452 based trans-
ducers and test systems, Maxim has produced the
MAX1452 evaluation kit (EV kit). First-time users of the
MAX1452 are strongly encouraged to use this kit.
The EV kit is designed to facilitate manual programming
of the MAX1452 with a sensor. It includes the following:
1) Evaluation Board with or without a silicon pressure
sensor, ready for customer evaluation.
2) Design/Applications Manual, which describes
in detail the architecture and functionality of the
MAX1452. This manual was developed for test engi-
neers familiar with data acquisition of sensor data and
provides sensor compensation algorithms and test
procedures.
3) MAX1452 Communication Software, which enables
programming of the MAX1452 from a computer key-
board (IBM compatible), one module at a time.
4) Interface Adapter, which allows the connection of the
evaluation board to a PC serial port.
Figure 7. Automated Test System Concept
MAX1452
V
OUT
V
DD
MODULE 1
DATA DATA
V
SS
V
SS
V
DD
V
DD
V
SS
TEST OVEN
MAX1452
V
OUT
MODULE 2
V
OUT
DIGITAL
MULTIPLEXER
+5V
DIO[1:N]
DIO1
DIO2
DION
MAX1452
V
OUT
MODULE N
DVM
MAX1452 Low-Cost Precision Sensor
Signal Conditioner
www.maximintegrated.com
Maxim Integrated │ 15