Datasheet

Evaluates: MAX1379
MAX1379 Evaluation Kit
8 _______________________________________________________________________________________
Table 2. Jumper Settings for True-Differential or Single-Ended Signal
Measurement (continued)
JUMPER
SHUNT
POSITION
DESCRIPTION
J2B 1-2
Connects the signal from the AIN2B_BNC connector to the noninverting input of the input
buffer (U6) through a 1kΩ resistor
JAIN2B 1-2 Connects the output of the input buffer (U6) to the AIN2B input of the MAX1379
JOP2- 1-2 Connects the inverting input of the input buffer (U6) to ground through a 1kΩ resistor
Table 3. Jumper Settings for Single-Ended Signal Generated Differential Signal
Measurement
JUMPER
SHUNT
POSITION
DESCRIPTION
J1A 1-2
Connects the signal from the AIN1A_BNC connector to the noninverting input of the input
buffer (U2) through a 1kΩ resistor
JAIN1A 1-2 Connects the output of the input buffer (U2) to the AIN1A input of the MAX1379
J1B 2-3 Connects the noninverting input of the input buffer (U3) to ground through a 1kΩ resistor
JAIN1B 1-2 Connects the output of the input buffer (U3) to the AIN1B input of the MAX1379
JOP1- 2-3
Connects the signal from the AIN1A_BNC connector to the inverting input of the input buffer
(U3) through a 1kΩ resistor
J2A 1-2
Connects the signal from the AIN2A_BNC connector to the noninverting input of the input
buffer (U5) through a 1kΩ resistor
JAIN2A 1-2 Connects the output of the input buffer (U5) to the AIN2A input of the MAX1379
J2B 2-3 Connects the noninverting input of the input buffer (U6) to ground through a 1kΩ resistor
JAIN2B 1-2 Connects the output of the input buffer (U6) to the AIN2B input of the MAX1379
JOP2- 2-3
Connects the signal from the AIN2A_BNC connector to the inverting input of the input buffer
(U6) through a 1kΩ resistor
Table 4. Jumper Settings for Bypassing the Input On-Board Buffers
JUMPER
SHUNT
POSITION
DESCRIPTION
J1A 2-3 Connects the noninverting input of the input buffer (U2) to ground through a 1kΩ resisto
JAIN1A 2-3 Connects the signal from the AIN1A_BNC connector to the AIN1A input of the MAX1379
J1B 2-3 Connects the noninverting input of the input buffer (U3) to ground through a 1kΩ resistor
JAIN1B 1-4 Connects the signal from the AIN1B_BNC connector to the AIN1B input of the MAX1379
JOP1- 1-2 Connects the inverting input of the input buffer (U3) to ground through a 1kΩ resistor
J2A 2-3 Connects the noninverting input of the input buffer (U5) to ground through a 1kΩ resistor
JAIN2A 2-3 Connects the signal from the AIN2A_BNC connector to the AIN2A input of the MAX1379
J2B 2-3 Connects the noninverting input of the input buffer (U6) to ground through a 1kΩ resistor
JAIN2B 1-4 Connects the signal from the AIN2B_BNC connector to the AIN2B input of the MAX1379
JOP2- 1-2 Connects the inverting input of the input buffer (U6) to ground through a 1kΩ resistor