Datasheet

Evaluates: MAX1379
C:\Program Files\MAX1379 (default installation direc-
tory) using the Browse
button. During device driver
installation, Windows may show a warning message
indicating that the device driver Maxim uses does
not contain a digital signature. This is not an error
condition and it is safe to proceed with installation.
17) Start the MAX1379 EV kit software by opening its
icon in the Start | Programs menu. The EV kit soft-
ware main window appears, as shown in Figure 1.
18) Press the Convert button in the ADC Conversion
group box.
19) Verify that voltage of approximately 2V is displayed
in the ADC Value Display group box under the
DOUT1 label.
20) Disconnect the +2V DC source.
21) Move the shunt of jumper JAIN1B to the 1-2 position.
22) Connect the CM1+ and CM1- pads to the 2V DC
source.
23) Connect the output of the function generator to the
AIN1A_BNC connector.
24) Set the function generator to generate a 60Hz, 2V
peak-to-peak sinusoidal wave with 0V DC common
mode.
25) Press the Start Conversion button in the Data
Logging group box.
26) Press the Calculate button.
27) Verify an approximate Frequency of 60Hz, a Min
value of -1V, and a MAX value of 1V are displayed
in the Calculation group box.
MAX1379 Evaluation Kit
4 _______________________________________________________________________________________
Figure 1. MAX1379 Evaluation Kit Main Window