Datasheet

Evaluates: MAX13047E
MAX13047E Evaluation Kit
_______________________________________________________________________________________ 3
JUMPER
SHUNT
POSITION
DESCRIPTION
1-2* Sets the clock generator to 8MHz for the input signals of I/O_VL1 or I/O_VCC1
JU1
2-3 Sets the clock generator to 4MHz for the input signals of I/O_VL1 or I/O_VCC1
1-2* Enables the inverter (U6) and sets the inverter’s output to VL logic level
JU2
2-3 Enables the inverter (U6) and sets the inverter’s output to VCC logic level
1-2* Connects the 8MHz or 4MHz signal from the inverter to the I/O_VL1 input signal
JU3
2-3 Connects the 8MHz or 4MHz signal from the inverter to the I/O_VCC1 input signal
1-2* Connects the 1MHz signal from the inverter to the I/O_VL2 input signal
JU4
2-3 Connects the 1MHz signal from the inverter to the I/O_VCC2 input signal
1-2* Enables the MAX13047E for normal operation
JU5
2-3 Sets the MAX13047E to shutdown mode
Open* Separates the I/O_VL1 signal from the I/O_VL2 signal
JU6
1-2 Connects the I/O_VL1 signal to the I/O_VL2 signal
Open* Separates the I/O_VCC1 signal from the I/O_VCC2 signal
JU7
1-2 Connects the I/O_VCC1 signal to the I/O_VCC2 signal
1-2* Enables the clock generators using the MAX13047E VCC logic level
JU8
2-3 Enables the clock generators using an external supply
1-2* Sets the MAX13047E VL logic level using the on-board 1.8V LDO
JU9
2-3 Sets the MAX13047E VL logic level using an external supply
1-2* Sets the MAX13047E VCC logic level using the on-board 3.0V LDO
JU10
2-3 Sets the MAX13047E VCC logic level using an external supply
Table 1. MAX13047E EV Kit Jumper Description (JU1–JU10)
* Default position.