Datasheet

MAX1232
Microprocessor Monitor
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
6 _____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600
© 2005 Maxim Integrated Products is a registered trademark of Maxim Integrated Products, Inc.
Package Information
For the latest package outline information, go to
www.maxim-ic.com/packages
.
t
RPD
V
CC
RST
V
CC
SLEW RATE = 1.66mV/µsec (0.5V/300µsec)
RST
+4.25V (10% TRIP POINT)
+4.5V (5% TRIP POINT)
V
OH
V
OL
0.099"
(2.51 mm)
0.070"
(1.78 mm)
ST
RST
RSTGND
TD
TOL
PB RST V
CC
t
RPU
V
CC
RST
RST
+4.75V (5% TRIP POINT)
+4.5V (10% TRIP POINT)
V
OH
V
OL
Figure 7. VCC Detect Reset Output Delay (Power-Down) Figure 8. VCC Detect Reset Output Delay (Power-Up)
Ordering Information (continued)
Chip Topography
Ordering Information continued on last page.
* Contact factory for dice specifications.
Devices in PDIP and SO packages are available in both leaded
and lead-free packaging. Specify lead free by adding the +
symbol at the end of the part number when ordering. Lead free
not available for CERDIP package.
PART TEMP RANGE PIN-PACKAGE
MAX1232CWE 0°C to +70°C 16 Wide SO
MAX1232EPA -40°C to +85°C 8 PDIP
MAX1232ESA -40°C to +85°C 8 SO
MAX1232EWE -40°C to +85°C 16 Wide SO
MAX1232MJA -55°C to +125°C 8 CERDIP