Datasheet

1
For the MAX11600/MAX11601, CS3 and CS2 are internally set to zero. For the MAX11602/MAX11603, CS3 is internally set to zero.
2
When SEL1 = 1, a single-ended read of AIN3/REF (MAX11600/MAX11601) or AIN11/REF (MAX11604/MAX11605) returns GND. This
does not apply to the MAX11602/MAX11603 as each provides separate pins for AIN7 and REF.
MAX11600–MAX11605
2.7V to 3.6V and 4.5V to 5.5V, Low-Power,
4-/8-/12-Channel 2-Wire Serial 8-Bit ADCs
______________________________________________________________________________________ 17
CS3
1
CS2
1
CS1 CS0 AIN0 AIN1 AIN2 AIN3
2
AIN4 AIN5 AIN6 AIN7 AIN8 AIN9 AIN10 AIN11
2
GN D
0000+ -
0001 + -
0010 + -
0011 + -
0100 + -
0101 + -
0110 + -
0111 + -
1000 + -
1001 +-
1010 +-
1011 +-
1 1 0 0 Reserved
1 1 0 1 Reserved
1 1 1 0 Reserved
1 1 1 1 Reserved
Table 3. Channel Selection in Single-Ended Mode (SGL/DIF = 1)