Datasheet

MAX1132/MAX1133
16-Bit ADC, 200ksps, 5V Single-Supply
with Reference
_______________________________________________________________________________________ 5
Note 1: Tested at AV
DD
= DV
DD
= +5V, bipolar input mode.
Note 2: Relative accuracy is the deviation of the analog value at any code from its theoretical value after the gain error and offset
error have been nulled.
Note 3: Offset nulled.
Note 4: Conversion time is defined as the number of clock cycles multiplied by the clock period, clock has 50% duty cycle.
Includes the acquisition time.
Note 5: ADC performance is limited by the converter’s noise floor, typically 300µVp-p.
Note 6: When an external reference has a different voltage than the specified typical value, the full scale of the ADC will scale
proportionally.
Note 7: Electrical characteristics are guaranteed from AV
DD(MIN)
= DV
DD(MIN)
to AV
DD(MAX)
= DV
DD(MAX)
. For operations beyond
this range, see the Typical Operating Characteristics. For guaranteed specifications beyond the limits, contact the factory.
Note 8: Defined as the change in positive full scale caused by a ±5% variation in the nominal supply voltage.
TIMING CHARACTERISTICS (Figures 5 and 6)
(AV
DD
= DV
DD
= +5V ±5%, T
A
= T
MIN
to T
MAX
, unless otherwise noted.)
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
Acquisition Time t
ACQ
1.14 µs
DIN to SCLK Setup t
DS
50 ns
DIN to SCLK Hold t
DH
0ns
SCLK to DOUT Valid t
DO
70 ns
CS Fall to DOUT Enable t
DV
C
LOAD
= 50pF 80 ns
CS Rise to DOUT Disable t
TR
C
LOAD
= 50pF 80 ns
CS to SCLK Rise Setup t
CSS
100 ns
CS to SCLK Rise Hold t
CSH
0ns
SCLK High Pulse Width t
CH
80 ns
SCLK Low Pulse Width t
CL
80 ns
SCLK Fall to SSTRB t
SSTRB
C
LOAD
= 50pF 80 ns
CS Fall to SSTRB Enable t
SDV
C
LOAD
= 50pF, external clock mode 80 ns
CS Rise to SSTRB Disable t
STR
C
LOAD
= 50pF, external clock mode 80 ns
SSTRB Rise to SCLK Rise t
SCK
Internal clock mode 0 ns
RST Pulse Width t
RS
208 ns