Instruction Manual

MAX11300PMB1 Peripheral Module and Munich (USB2PMB1) Adapter Board Quick Start Guide

3) Ensure that the jumper settings for VSSIO and VSSIO power supplies are correct

(both closed). Refer to the MAX11300PMB1 data sheet for further details.

4) Connect the Munich board’s 2x6 pin right-angle connector to the

MAX11300PMB1’s 2x6 pin right-angle header.

5) Once the Munich board is connected with the MAX11300PMB1, open the

Munich GUI.exe (double-click) software.

6) Click on Device tab and select the MAX11300PMB as shown in Figure 8, the

Munich GUI.

Figure 8. The Munich GUI