Instruction Manual

MAX11300PMB1 Peripheral Module and Munich (USB2PMB1) Adapter Board Quick Start Guide

4. Procedure

1) Go to www.maximintegrated.com/evkitsoftware to download the most recent

version of the Munich board software, Munich GUI. Double-click on the

installation file Munich GUISetupV1.0.exe to install the GUI.

2) Connect the USB cable between the Munich board and the PC; the USB driver is

installed automatically (Internet connection required). Alternately, install the FTDI

driver by double-clicking on the CDM V2.08.30 WHQL Certified.exe application

file in the FTDI Driver.zip folder. See Figure 5, Figure 6, and Figure 7.

Figure 5. Driver Installation for Munich Board