Instruction Manual

MAX11300PMB1 Peripheral Module and Munich (USB2PMB1) Adapter Board Quick Start Guide

Figure 18. Register Files

5. The Munich GUI now shows all pin descriptions in the GUI according to the register

file. But the GUI does not immediately write it to the device, allowing the user

opportunity to double-check. This step is only important if something is already

connected to the MAX11300 ports as a DAC can provide up to ±10V and potentially

destroy the external circuitry. Also, do not connect 2-DAC ports together (shorted)

and set to different voltage levels. In addition, GPI ports can only support

levels between 0V and 5V. Therefore, do not connect a DAC to a GPI with a

voltage outside of the allowed range. A Confirmation window appears as depicted

in Figure 19.