Instruction Manual

MAX11300PMB1 Peripheral Module and Munich (USB2PMB1) Adapter Board Quick Start Guide
7) Press the Scan Adapters pushbutton to scan the available Munich boards
connected to the computer. This allows the user to test multiple companion driver
boards at the same time. Each Munich board has a unique ID that the software
determines.
Scan and Select:
Figure 9 depicts the scanning and available Munich devices connected.
The software has identified two devices:
1. PMOD000047A
2. PMOD000019A
Figure 9. Connect PMOD Adapter
8) Within the tab sheet, press the Connect button and verify that the button
changes its text to Disconnect and the status bar at the bottom indicates that the
companion board is connected. See Figure 10.
Scans for
connected
boards
Available Munich
devices
10