Datasheet

Maxim Integrated │ 10
www.maximintegrated.com
Evaluates: MAX11300
MAX11300 Evaluation Kit
Table 3. MAX11300EVKIT Jumper Configuration (Temperature Sensor)
Table 4. MAX11300EVKIT Jumper Configuration (On-Board External References)
*Default position.
*Default position.
JUMPER SIGNAL
SHUNT
POSITION
DESCRIPTION
JUD0P D0P
1-2
10Ω resistor RD0P emulates long connection wire series resistance, using
on-board MMBT3904 as temp sensor
1-3* Direct connection to on-board MMBT3904 used as temp sensor
1-4
Connect external temperature sense diode junction to D0P_ext / D0N_ext
pair on header J1, J2, or J3
JUD0N D0N
1-2
10Ω resistor RD0N emulates long connection wire series resistance,
using on-board MMBT3904 as temp sensor
1-3* Direct connection to on-board MMBT3904 used as temp sensor
1-4
Connect external temperature sense diode junction to D0P_ext / D0N_ext
pair on header J1, J2, or J3
JUD1P D1P
1-2
10Ω resistor RD1P emulates long connection wire series resistance, using
on-board MMBT3904 as temp sensor
1-3* Direct connection to on-board MMBT3904 used as temp sensor
1-4
Connect external temperature sense diode junction to D1P_ext / D1N_ext
pair on header J1, J2, or J3
JUD1N D1N
1-2
10Ω resistor RD1N emulates long connection wire series resistance,
using on-board MMBT3904 as temp sensor
1-3* Direct connection to on-board MMBT3904 used as temp sensor
1-4
Connect external temperature sense diode junction to D1P_ext / D1N_ext
pair on header J1, J2, or J3
JUMPER SIGNAL
SHUNT
POSITION
DESCRIPTION
JU_ADC_REF ADC_EXT_REF
1-2* On-board MAX6071 reference U2 drives ADC_EXT_REF
Open On-board MAX6071 reference U2 is disconnected from ADC_EXT_REF
JU_DAC_REF DAC_REF
1-2*
On-board MAX6071 reference U3 drives DAC_REF
(Kelvin connection force)
Open On-board MAX6071 reference U3 is disconnected from DAC_REF
JU_DAC_REFS DAC_REFS
1-2*
On-board MAX6071 reference U3 drives DAC_REF
(Kelvin connection sense)
Open On-board MAX6071 reference U3 is disconnected from DAC_REF