Datasheet

MAX11103 Evaluation Kit
Evaluates: MAX11103
_______________________________________________________________________________________ 5
Figure 1. MAX11103 EV Kit Software Main Window
The Single Conversion tab sheet displays one sampled
data.
Check the Auto Convert checkbox to automatically
and repeatedly do the ADC conversions and update the
active tab sheet.
Time Domain Tab
In the Time Domain tab sheet (Figures 2a and 2b),
check the Remove DC check box to remove the DC
component of the sampled signal. In the Scope Display
Control Vertical group box, when the Auto Scale
checkbox is checked, the software automatically scales
the vertical axis in the plot. If the Auto Scale checkbox is
unchecked, enter the appropriate values into the Y-MAX
and Y-MIN edit boxes and press the Set button to set the
boundaries for the vertical axis. The software automati-
cally calculates the Frequency, RMS, MIN, MAX, and
Avg DC of the sampled signal and displays the calcu-
lated values in the Calculation group box.
Frequency Domain Tab
The Frequency Domain tab sheet (Figure 3) displays
the FFT plot of the signal shown in the Time Domain tab
sheet.