Datasheet

Evaluates: MAX11044–MAX11049
MAX11046 Evaluation Kit
2 _______________________________________________________________________________________
Component List (continued)
DESIGNATION QTY DESCRIPTION
JU15 0 Not installed, 2-pin header
RN1, RN2, RN3,
RN7
433Ω x 8-resistor network (0402)
RN4 1 1kΩ x 4-resistor network (0402)
RN5, RN6 2 10kΩ x 4-resistor network (0402)
RN8, RN9,
RN10
30Ω x 8-resistor network (0402)
R1, R2,
R11, R41
4 200Ω ±1% resistors (0603)
R3–R8,
R35, R44
81kΩ ±1% resistors (0603)
R9 1 0Ω ±5% resistor (0603)
R10, R13, R18,
R20, R29
510Ω ±1% resistors (0603)
R12, R26,
R42, R46
4 33.2Ω ±1% resistors (0603)
R14 1 680kΩ ±5% resistor (0603)
R15, R16 2 27Ω ±5% resistors (0603)
R17, R21, R22 3 1.5kΩ ±5% resistors (0603)
R19 1 47kΩ ±5% resistor (0603)
R23, R34, R43 3 10kΩ ±1% resistors (0603)
R24 1 2.2kΩ ±5% resistor (0603)
R25 1 1kΩ ±5% resistor (0805)
R27, R30–R33,
R37–R40
0 Not installed, resistors
DESIGNATION QTY DESCRIPTION
R28 1 300kΩ, ±5% resistor (0603)
R36, R45 2 100Ω ±1% resistors (0603)
S1 1 Half-pitch, 4-position DIP switch
TP3–TP11 0 Not installed, test points
U1 1
8-channel 16-bit ADC
(56 TQFN-EP*)
Maxim MAX11046ETN+
U2 1 16-bit 200MHz DSP (179 BGA)
U3 1
Voltage reference (8 SO)
Maxim MAX6126AASA41+
U4 1 256k x 16 flash memory (48 TSOP)
U5 1
LDO linear regulator (8 TDFN)
Maxim MAX1976AETA160+
U6 1
350mA, 16.5V input, LDO linear
regulator (8 SO)
Maxim MAX1658ESA+
U7 1
350mA, 16.5V input, LDO linear
regulator (8 SO)
Maxim MAX1659ESA+
U8 1 64Mbit SDRAM (54 TSOP)
U9, U10 0 Not installed, op amps (8 MOSP)
Y1 1 12MHz, 6mm SMT crystal
Y2 0 Not installed, crystal
— 1 PCB: MAX11046 EVALUATION KIT+
Component Suppliers
SUPPLIER PHONE WEBSITE
Murata Electronics North America, Inc. 770-436-1300 www.murata-northamerica.com
ON Semiconductor 602-244-6600 www.onsemi.com
SANYO Electric Co., Ltd. 619-661-6835 www.sanyodevice.com
TDK Corp. 847-803-6100 www.component.tdk.com
MAX11046 EV Kit Files
FILE DESCRIPTION
INSTALL.EXE Installs the EV kit files on your computer
MAX11046.EXE Application program
LIBUSB.INF USB device driver file
UNINST.INI Uninstalls the EV kit software
* EP = Exposed pad.
Note: Indicate that you are using the MAX11046, MAX11044, MAX11045, MAX11047, MAX11048, or MAX11049 when contacting
these component suppliers.