Users Guide: Network Microcontroller Supplement User Manual

High-Speed Microcontroller User’s
Guide: Network Microcontroller
Supplement
66
Slave Address Mask Enable Register 1 (SADEN1)
R = Unrestricted read, W = Unrestricted write, -n = Value after reset
CAN 0 Message Center 11 Control Register (C0M11C)
R = Unrestricted read, C = Clear only, * = See description, -n = Value after reset
This SFR is not present on the DS80C411.
76543210
SFR BAh SADEN1.7 SADEN1.6 SADEN1.5 SADEN1.4 SADEN1.3 SADEN1.2 SADEN1.1 SADEN1.0
RW-0 RW-0 RW-0 RW-0 RW-0 RW-0 RW-0 RW-0
7 6543210
SFR BBh MSRDY ETI ERI INTRQ EXTRQ MTRQ
ROW/TIH
DTUP
RW-0 RW-0 RW-0 RW-0 RC-0 R*-0 R*-0 R*-0
CAN 0 Message Center 12 Control Register (C0M12C)
R = Unrestricted read, C = Clear only, * = See description, -n = Value after reset
This SFR is not present on the DS80C411.
SADEN1.7–0
Bits 7–0
Slave address mask enable register 1. This register is a mask enable when comparing serial port 1
addresses for automatic address recognition. When a bit is set in this register, the corresponding
bit location in the SADDR1 register is exactly compared with the incoming serial port 1 data to deter-
mine if a receive interrupt should be generated. When a bit in this register is cleared, the correspond-
ing bit in the SADDR1 register becomes a “don’t care” and is not compared against the incoming data.
All incoming data generates a receive interrupt when this register is cleared.
C0M11C
Bits 7–0
Operation of the bits in this register are identical to those found in the CAN 0 message 1 control regis-
ter (C0M1C: ABh). Please consult the description of that register for more information.
C0M12C
Bits 7–0
Operation of the bits in this register are identical to those found in the CAN 0 message 1 control regis-
ter (C0M1C: ABh). Please consult the description of that register for more information.
C0M13C
Bits 7–0
Operation of the bits in this register are identical to those found in the CAN 0 message 1 control regis-
ter (C0M1C: ABh). Please consult the description of that register for more information.
76543210
SFR BCh MSRDY ETI ERI INTRQ EXTRQ MTRQ
ROW/TIH
DTUP
RW-0 RW-0 RW-0 RW-0 RC-0 R*-0 R*-0 R*-0
CAN 0 Message Center 13 Control Register (C0M13C)
R = Unrestricted read, C = Clear only, * = See description, -n = Value after reset
This SFR is not present on the DS80C411.
76543210
SFR BDh MSRDY ETI ERI INTRQ EXTRQ MTRQ
ROW/TIH
DTUP
RW-0 RW-0 RW-0 RW-0 RC-0 R*-0 R*-0 R*-0
Maxim Integrated