Datasheet

DS8007
Bits 7 to 0: Timeout Counter Register 2 Bits (TOL15
to TOL8). This register can be configured to operate as
the lower 8 bits of a 16-bit counter or as the middle 8
bits of a 24-bit counter. See the
Timeout Counter
Operation section for details on configurable modes.
Timeout Counter Register 2 (TOR2)
R = unrestricted read, W = unrestricted write, -n = value after reset. This register is unchanged on RIU = 0.
76543210
Address 0Ah TOL15 TOL14 TOL13 TOL12 TOL11 TOL10 TOL9 TOL8
W-0 W-0 W-0 W-0 W-0 W-0 W-0 W-0
Timeout Counter Register 3 (TOR3)
R = unrestricted read, W = unrestricted write, -n = value after reset. This register is unchanged on RIU = 0.
76543210
Address 0Bh TOL23 TOL22 TOL21 TOL20 TOL19 TOL18 TOL17 TOL16
W-0 W-0 W-0 W-0 W-0 W-0 W-0 W-0
Bits 7 to 0: Timeout Counter Register 3 Bits (TOL23
to TOL16). This register can be configured to operate
as the high 8 bits of a 16-bit counter or as the high 8
bits of a 24-bit counter. See the
Timeout Counter
Operation section for details on configurable modes.
Timeout Counter Register 1 (TOR1)
R = unrestricted read, W = unrestricted write, -n = value after reset. This register is unchanged on RIU = 0.
76543210
Address 09h TOL7 TOL6 TOL5 TOL4 TOL3 TOL2 TOL1 TOL0
W-0 W-0 W-0 W-0 W-0 W-0 W-0 W-0
Bits 7 to 0: Timeout Counter Register 1 Bits (TOL7 to
TOL0). This register can be configured to operate as an
8-bit counter or as the lowest 8 bits of a 24-bit counter.
TOR1, TOR2, and TOR3 are concatenated to form a 24-
bit ETU counter or a pair of independent 16- and 8-bit
counters. These counters are only used when a card is
supplied an active clock. See the
Timeout Counter
Operation section for details on configurable modes.
Multiprotocol Dual Smart Card Interface
______________________________________________________________________________________ 21