Datasheet

DS4106/DS4212/DS4425
106.25MHz/212.5MHz/425MHz
Clock Oscillators
4 _______________________________________________________________________________________
Note 1: Limits at -40°C are guaranteed by design and are not production tested.
Note 2: Voltage referenced to ground.
Note 3: Outputs are enabled and unloaded.
Note 4: When the LVPECL output is disabled, the typical output off current is < 100µA for nominal LVPECL signal levels at the
output.
Note 5: AC parameters are guaranteed by design and characterization.
Note 6: Including oscillator startup time and PLL acquisition time, measured after V
CC
reaches 3.0V from power-on.
ELECTRICAL CHARACTERISTICS (continued)
(V
CC
= 3.0V to 3.6V, T
A
= -40°C to +85°C, typical values are at V
CC
= +3.3V and T
A
= +25°C, unless otherwise noted.) (Note 1)
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
100Hz -90
1kHz -112
10kHz -115
100kHz -123
1MHz -142
DS4106 at 106.25MHz
10MHz -147
100Hz -82
1kHz -106
10kHz -109
100kHz -117
1MHz -136
DS4212 at 212.50MHz
10MHz -141
100Hz -76
1kHz -100
10kHz -103
100kHz -111
1MHz -130
Clock Output SSB Phase Noise
DS4425 at 425.00MHz
10MHz -135
dBc/Hz