Datasheet

____________________________________________________ DS34T101, DS34T102, DS34T104, DS34T108
324 of 366
Identification Register. The Identification register contains a 32-bit shift register and a 32-bit latched parallel
output. This register is selected during the IDCODE instruction and when the TAP controller is in the Test-Logic-
Reset state.
Boundary Scan Register. This register contains both a shift register path and a latched parallel output for all
control cells and digital I/O cells and is 32 bits in length. The BSDL file found at http://www.maxim-
ic.com/to
ols/bsdl/ shows the entire cell bit locations and definitions.