Datasheet

____________________________________________________ DS34T101, DS34T102, DS34T104, DS34T108
213 of 366
CPU_Queues_mask 0x1C4
Bits Data Element Name R/W
Reset
Value
Description
[31:10] Reserved - 0x0 Must be set to zero
[9] TDM_to_CPU_pool_thresh R/W 0x1 Mask TDM_to_CPU_pool_thresh interrupts
[8] TDM_to_CPU_q_thresh R/W 0x1 Mask TDM_to_CPU_q_thresh interrupts
[7] CPU_to_ETH_q_thresh R/W 0x1 Mask CPU_to_ETH_q_thresh interrupts
[6] ETH_to_CPU_pool_thresh R/W 0x1 Mask ETH_to_CPU_pool_thresh interrupts
[5] ETH_to_CPU_q_thresh R/W 0x1 Mask ETH_to_CPU_q_thresh interrupts
[4:3] Reserved R/W 0x1 Must be set to zero
[2] CPU_to_TDM_q_thresh R/W 0x1 Mask CPU_to_TDM_q_thresh interrupts
[1] Tx_return_q_thresh R/W 0x1 Mask Tx_return_q_thresh interrupts
[0] Rx_return_q_thresh R/W 0x1 Mask Rx_return_q_thresh interrupts
11.4.15 Packet Classifier
The base address for the packet classifier register space is 0x70,000. In the register descriptions in this section the
index n indicates register number: 1 to 8. These registers can store eight possible OAM bundle numbers.
Table 11-16. Packet Classifier OAM Identification Registers
Addr
Offset
Register Name Description Page
0x000 OAM Identification1 1st Identification for control packets 213
0x004 OAM Identification2 2nd Identification for control packets 213
0x008 OAM Identification3 3rd Identification for control packets 213
0x00C OAM Identification4 4th Identification for control packets 213
0x010 OAM Identification5 5th Identification for control packets 213
0x014 OAM Identification6 6th Identification for control packets 213
0x018 OAM Identification7 7th Identification for control packets 213
0x01C OAM Identification8 8th Identification for control packets 213
0x080 OAM Identification Validity1 1st Identification validity for control packets 213
0x084 OAM Identification Validity2 2nd Identification validity for control packets 213
0x088 OAM Identification Validity3 3rd Identification validity for control packets 213
0x08C OAM Identification Validity4 4th Identification validity for control packets 213
0x090 OAM Identification Validity5 5th Identification validity for control packets 213
0x094 OAM Identification Validity6 6th Identification validity for control packets 213
0x098 OAM Identification Validity7 7th Identification validity for control packets 213
0x09C OAM Identification Validity8 8th Identification validity for control packets 213
OAM_Identification[n] 0x000+(n-1)*4
Bits Data Element Name R/W
Reset
Value
Description
[31:0] OAM Identification R/W None
OAM Identification n. If the corresponding validity bit
(below) is set then the packet classifier compares the
bundle identifier of received packets with the value stored
in this register. If they match then the packet classifier
considers the received packet to be an OAM packet. See
section 10.6.13.3.
OAM_Identification_validity[n] 0x080+(n-1)*4
Bits Data Element Name R/W
Reset
Value
Description
[31:1] Reserved - 0x0 Must be set to zero
[0] OAM Identification Validity R/W 0x0
1 = OAM Identification n (above) has a valid value. See
section 10.6.13.3.