Datasheet

____________________________________________________ DS34S101, DS34S102, DS34S104, DS34S108
Rev: 032609 92 of 198
IDR (Identification Device Register) 0x0C
Bits Data Element Name R/W Default Description
[31:16]
ID[31:16]
RO
0
These bits are always zero.
[15:4]
ID[15:4]
RO
See
JTAG ID.
Device ID
These bits have the same information as the lower 12 bits of the
Device ID portion of the JTAG ID register. See Table 12-2.
[3:0]
ID[3:0]
RO
See
JTAG ID.
Device Revision
These bits have the same information as the four REV bits of the
JTAG ID register. See Table 12-2.
GTISR (Global Transceiver Interrupt Status Register) 0x10
Bits Data Element Name R/W Default Description
[31:25]
Not used.
-
0
Must be set to zero.
[24]
TDMoPIS
RO
0
TDM-over-Packet Interrupt Status
This status bit indicates when the TDM-over-Packet block is
signaling an interrupt request. Interrupt mask is
GTIMR.TDMoPIM.
0 = TDM-over-Packet has not issued an interrupt.
1 = TDM-over-Packet has issued an interrupt.
[23:0]
Not Used
-
0
Must be set to zero.
GTIMR (Global Transceiver Interrupt Mask Register) 0x14
Bits Data Element Name R/W Default Description
[31:25]
Not used.
-
0
Must be set to zero.
[24]
TDMoPIM
R/W
0
TDM-over-Packet Interrupt Mask
This bit is the interrupt mask for GTISR.TDMoPIS.
0 = Interrupt masked.
1 = Interrupt enabled.
[23:0]
Not Used
-
0
Must be set to zero.