Datasheet
DS3150
21 of 28
3. ELECTRICAL CHARACTERISTICS
ABSOLUTE MAXIMUM RATINGS
Voltage Range on Any Lead with Respect to V
SS
(except V
DD
) -0.3V to 5.5V
Supply Voltage Range (V
DD
) with Respect to V
SS
-0.3V to 3.63V
Operating Temperature Range -40°C to +85°C
Storage Temperature Range -55°C to +125°C
Soldering Temperature Range See IPC/JEDEC J-STD-020 Standard
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only,
and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is
not implied. Exposure to the absolute maximum rating conditions for extended periods may affect device reliability.
Note: The typical values listed below are not production tested.
RECOMMENDED DC OPERATING CONDITIONS
(T
A
= 0°C to +70°C for DS3150Q/T, T
A
= -40°C to +85°C for DS3150QN/TN.)
PARAMETER SYMBOL MIN TYP MAX UNITS
Logic 1 V
IH
2.4 5.5 V
Logic 0 V
IL
-0.3 +0.8 V
Power Supply V
DD
3.135 3.465 V
DC CHARACTERISTICS
(V
DD
= 3.3V ±5%, T
A
= 0°C to +70°C for DS3150Q/T, T
A
= -40°C to +85°C for DS3150QN/TN.)
PARAMETER SYMBOL MIN TYP MAX UNITS
E3 Supply Current (Note 1) I
DD
75 90 mA
DS3 Supply Current (Note 1) I
DD
87 102 mA
STS-1 Supply Current (Note 1) I
DD
95 110 mA
Power-Down Current (Note 2) I
PD
45 mA
Lead Capacitance C
IO
7 pF
Input Leakage (Note 3) I
IL
-10 +10
mA
Input Leakage (I3 Pins or Pins with
Internal Pullup Resistors) (Note 3)
I
ILP
-500 +500
mA
Output Leakage (PRBS Pin, when High-Z) I
LO
-10 +10
mA
Output Current (V
OH
= 2.4V) I
OH
-4.0 mA
Output Current (V
OL
= 0.4V) I
OL
+4.0 mA
Pullup Resistor on I3 Pins Z
I3
13
kW
Note 1:
TCLK at 34.368MHz for E3, 44.736MHz for DS3, or 51.84MHz for STS-1; MCLK floating; TX+/TX- driving all ones into 150W
resistive load; all ones driven into RX+/RX- (1.0V square wave); all other inputs at V
DD
or grounded; all other outputs open.
Note 2:
V
DD
= 3.465V; MCLK = 44.736MHz and TTS = 0; other inputs at V
DD
or grounded; other outputs left open-circuited.
Note 3:
0V < V
IN
< V
DD.