Datasheet

DS2786 Stand-Alone OCV-Based Fuel Gauge
22 of 22
Maxim/Dallas Semiconductor cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim/Dallas Semiconductor product.
No circuit patent licenses are implied. Maxim/Dallas Semiconductor reserves the right to change the circuitry and specifications without notice at any time.
Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600
© 2009 Maxim Integrated Products
The Maxim logo is a registered trademark of Maxim Integrated Products, Inc. The Dallas logo is a registered trademark of Dallas Semiconductor Corporation.
REVISION HISTORY
REVISION
DATE
DESCRIPTION
PAGES
CHANGED
In the Recommended DC Operating Characteristics, changed the PIO pin range
to VPROG pin range and changed the operating range to 15.5V.
2
Corrected bit locations of VDIS and LODIS bits in EEPROM (Figure 14 and
Status/Config Register section).
12, 17
Fixed grammatical error under OCV cell model section: “required” to “require.” 13
030708
Fixed grammatical error describing Copy bit under Memory Map section.
15
070808 In Figure 23, changed bit 6 from X (reserved) to 0. 18
101708 Changed operation to 4.5V maximum. 2, 3, 5, 8, 13
Changed the V
DD
maximum operating range in the Electrical Characteristics
table to 4.5V.
2, 3
051209
Added “V
IN
pin is limited to V
DD
voltage” text in the Voltage Measurement
section.
8