Datasheet

DS26521 Single T1/E1/J1 Transceiver
250 of 258
13. JTAG BOUNDARY SCAN AND TEST ACCESS PORT
The DS26521 IEEE 1149.1 design supports the standard instruction codes SAMPLE:PRELOAD, BYPASS, and
EXTEST. Optional public instructions included are HIGHZ, CLAMP, and IDCODE. See
Table 13-1. The DS26521
contains the following as required by IEEE 1149.1 Standard Test Access Port and Boundary Scan Architecture.
Test Access Port (TAP)
TAP Controller
Instruction Register
Bypass Register
Boundary Scan Register
Device Identification Register
The Test Access Port has the necessary interface pins:
JTRST, JTCLK, JTMS, JTDI, and JTDO. See the pin
descriptions for details.
Figure 13-1. JTAG Functional Block Diagram
JTDI JTMS JTCLK
J
TRST
JTDO
TEST ACCESS PORT
CONTROLLER
V
DD
V
DD
V
DD
BOUNDRY SCAN
REGISTER
BYPASS
REGISTER
INSTRUCTION
REGISTER
IDENTIFICATION
REGISTER
MUX
SELECT
OUTPUT ENABLE
10kΩ
10kΩ
10k
Ω