Datasheet

DS26521 Single T1/E1/J1 Transceiver
141 of 258
Register Name:
RLS1
Register Description:
Receive Latched Status Register 1
Register Address:
090h
Bit # 7 6 5 4 3 2 1 0
Name RRAIC RAISC RLOSC RLOFC RRAID RAISD RLOSD RLOFD
Default 0 0 0 0 0 0 0 0
Note: All bits in this register are latched and can create interrupts.
Bit 7: Receive Remote Alarm Indication Condition Clear (RRAIC). Falling edge detect of RRAI. Set when a
RRAI condition has cleared.
Bit 6: Receive Alarm Indication Signal Condition Clear (RAISC). Falling edge detect of RAIS. Set when a RAIS
condition has cleared.
Bit 5: Receive Loss of Signal Condition Clear (RLOSC). Falling edge detect of RLOS. Set when an RLOS
condition has cleared.
Bit 4: Receive Loss of Frame Condition Clear (RLOFC). Falling edge detect of RLOF. Set when an RLOF
condition has cleared.
Bit 3: Receive Remote Alarm Indication Condition Detect (RRAID). Rising edge detect of RRAI. Set when a
remote alarm is received at RTIP and RRING.
Bit 2: Receive Alarm Indication Signal Condition Detect (RAISD). Rising edge detect of RAIS.Set when an
unframed all-ones code is received at RTIP and RRING.
Bit 1: Receive Loss of Signal Condition Detect (RLOSD). Rising edge detect of RLOS. Set when 192
consecutive zeros have been detected at RTIP and RRING.
Bit 0: Receive Loss of Frame Condition Detect (RLOFD). Rising edge detect of RLOF. Set when the DS26521
has lost synchronized to the received data stream.