Datasheet

DS26518 8-Port T1/E1/J1 Transceiver
228 of 312
Register Name:
TSYNCC
Register Description:
Transmit Synchronizer Control Register
Register Address:
18Eh + (200h x (n - 1)) : where n = 1 to 8
Bit # 7 6 5 4 3 2 1 0
Name — — — — — TSEN SYNCE RESYNC
— — — —
CRC4 TSEN SYNCE RESYNC
Default 0 0 0 0 0 0 0 0
Bit 3: CRC-4 Enable (CRC4) (E1 Mode Only)
0 = Do not search for the CRC-4 multiframe word.
1 = Search for the CRC-4 multiframe word.
Bit 2: Transmit Synchronizer Enable (TSEN)
0 = Transmit synchronizer disabled.
1 = Transmit synchronizer enabled.
Bit 1: Sync Enable (SYNCE)
0 = Auto resync enabled.
1 = Auto resync disabled.
Bit 0: Resynchronize (RESYNC). When toggled from low to high, a resynchronization of the transmit-side framer
is initiated. Must be cleared and set again for a subsequent resync.