Datasheet

DS26514 4-Port T1/E1/J1 Transceiver
19-5856; Rev 4; 5/11 173 of 305
Bit 1 : Receive Channel Bit 2 Suppress/ Sa7 Bit Suppress (BSE2). Set to one to stop this bit from being used
Bit 0 : Receive Channel Bit 1 Suppress / Sa8 Bit Suppress (BSE1). LSB of the channel. Set to one to stop this
bit from being used.
Register Name:
RLS1
Register Description:
Receive Latched Status Register 1
Register Address:
090h + (200h x (n - 1)) : where n = 1 to 4
Bit #
7
6
5
4
3
2
1
0
Name
RRAIC
RAISC
RLOSC
RLOFC
RRAID
RAISD
RLOSD
RLOFD
Default
0
0
0
0
0
0
0
0
Note: All bits in this register are latched and can create interrupts.
Bit 7: Receive Remote Alarm Indication Condition Clear (RRAIC). Falling edge detect of RRAI. Set when a
RRAI condition has cleared.
Bit 6: Receive Alarm Indication Signal Condition Clear (RAISC). Falling edge detect of RAIS. Set when a RAIS
condition has cleared.
Bit 5: Receive Loss of Signal Condition Clear (RLOSC). Falling edge detect of RLOS. Set when an RLOS
condition has cleared.
Bit 4: Receive Loss of Frame Condition Clear (RLOFC). Falling edge detect of RLOF. Set when an RLOF
condition has cleared.
Bit 3: Receive Remote Alarm Indication Condition Detect (RRAID). Rising edge detect of RRAI. Set when a
remote alarm is received at RRINGn and RTIPn.
Bit 2: Receive Alarm Indication Signal Condition Detect (RAISD). Rising edge detect of RAIS.Set when an
unframed all-ones code is received at RRINGn and RTIPn.
Bit 1: Receive Loss of Signal Condition Detect (RLOSD). Rising edge detect of RLOS. Set when 192
consecutive zeros have been detected at RRINGn and RTIPn.
Bit 0: Receive Loss of Frame Condition Detect (RLOFD). Rising edge detect of RLOF. Set when the DS26514
has lost synchronized to the received data stream.