Datasheet

DS2406
32 of 32
REVISION HISTORY
REVISION
DATE
DESCRIPTION
PAGES
CHANGED
Relocated V
PUP
specification from headline to Data Pin parameter block in the
DC ELECTRICAL CHARACTERISTICS table.
Changed V
ILmax
spec from 0.8V to 0.5V.
Removed V
OH
spec for 1-Wire port.
Changed V
ILAmax
spec from 0.6V to 0.3V.
Replaced input resistance RI with input leakage current ILA, ILB.
Replaced V
OHA
with V
PUPA
.
Replaced V
OHB
with V
PUPB
.
Added GBD note to I
LA
, I
LB
, I
SA
, I
SB
, V
PUPA
, V
PUPB
.
Changed I
CCmax
from 4μA to 6μA.
28
Changed t
LOWRmin
from 1μs to 2μs.
Changed t
SUmax
from 1μs to 2μs.
Changed t
RECmin
from 1μs to 5μs.
29
Updated PIO Sink Current graphic for 4mA (PIO-B) at 2.8V VPUP and added
GBD note to graphic.
30
Updated document text to match changes in EC table. 1, 17, 24. 25
033109
Removed leaded and flip-chip part numbers and references in the
Ordering
Information
table.
1
Maxim/Dallas Semiconductor cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim/Dallas Semiconductor
product. No circuit patent licenses are implied. Maxim/Dallas Semiconductor reserves the right to change the circuitry and specifications without notice at any
time.
Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600
© 2009 Maxim Integrated Products • Printed USA
MAXIM is a registered trademark of Maxim Integrated Products, Inc. DALLAS is a registered trademark of Dallas Semiconductor Corporation.