Datasheet

DS2401
REVISION HISTORY
REVISION
DATE
DESCRIPTION
PAGES
CHANGED
040601
Changed MicroLAN to 1-Wire Net; updated ordering information for
tape and reel
1
Changed soldering temperature from 260°C for 10 seconds to See J-STD-
020A Specification
9
022202
Below Figure 3, added a note on the optimal R
PUP
range; added a similar
note before the Read/Write Time Slots section
3, 6
Added notes 11 to 13 to the EC table 9, 10
122106
Added flip chip package; added lead-free ordering information 1, 2
References to the Book of iButton Standards replaced with references to
corresponding application notes
Various
V
ILMAX
changed from 0.8V to 0.3V, EC table note 11 deleted 9, 10
5/11
Deleted standard (Pb) parts from ordering information; changed flip chip
part number from DS2401X1 to DS2401X1-S#T
2
Deleted V
OH
from the EC table; moved V
PUP
from the EC table header
into the EC table; changed soldering temperature from J-STD-020A
reference to explicit package specific numbers
9
Added Package Information and Revision History sections 10, 11
11
Maxim Integrated 160 Rio Robles, San Jose, CA 95134 USA 1-408-601-1000
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied.
Maxim reserves the right to change the circuitry and specifications without notice at any time. The parametric values (min and max limits) shown in the Electrical
Characteristics table are guaranteed. Other parametric values quoted in this data sheet are provided for guidance.
©
2011 Maxim Integrated
The Maxim logo and Maxim Integrated are trademarks of Maxim Integrated Products, Inc.