Datasheet

DS21Q50
74 of 87
20. OPERATING PARAMETERS
ABSOLUTE MAXIMUM RATINGS
Voltage Range on Any Pin Relative to Ground………………………………………………………………-1.0V to +6.0V
Operating Temperature Range for DS21Q50L………………………………………………………………..0°C to +70°C
Operating Temperature Range for DS21Q50LN……………………………………………………………-40°C to +85°C
Storage Temperature Range………………………………………………………………………………...-55°C to +125°C
Soldering Temperature………………………………………………………..See IPC/JEDEC J-STD-020A Specification
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only,
and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is
not implied. Exposure to the absolute maximum rating conditions for extended periods may affect device reliability.
RECOMMENDED DC OPERATING CONDITIONS
(T
A
= 0°C to +70°C for DS21Q50L; -40°C to +85°C for DS21Q50LN.)
PARAMETER SYMBOL MIN TYP MAX UNITS
Logic 1 V
IH
2.0 5.5 V
Logic 0 V
IL
-0.3 +0.8 V
Supply (Note 1) V
DD
3.135 3.3 3.465 V
CAPACITANCE
(T
A
= +25°C)
PARAMETER SYMBOL MIN TYP MAX UNITS
Input Capacitance C
IN
5 pF
Output Capacitance C
OUT
7 pF
DC CHARACTERISTICS
(V
DD
= 3.3V ±5%, T
A
= 0°C to +70°C for DS21Q50L; V
DD
= 3.3V ±5%, T
A
= -40°C to +85°C for DS21Q50LN.)
PARAMETER SYMBOL MIN TYP MAX UNITS
Supply Current at 3.3V (Note 2) I
DD
230 mA
Input Leakage (Note 3) I
IL
-1.0 +1.0
mA
Output Leakage (Note 4) I
LO
+1.0
mA
Output Current (2.4V) I
OH
-1.0 mA
Output Current (0.4V) I
OL
+4.0 mA
Note 1:
Applies to RVDD, TVDD, and DVDD.
Note 2:
TCLKs = SYSCLKs = MCLK = 2.048MHz; outputs open circuited; TTIPs and TRINGs driving 30W; QRSS data pattern. 0.0V < V
IN
<
V
DD
.
Note 3:
Applied to INT when tri-stated.
Note 4:
Applies to output pins in tri-state condition.