Datasheet
3.3V Spread-Spectrum EconOscillator
2 Maxim Integrated
DS1086L
ABSOLUTE MAXIMUM RATINGS
RECOMMENDED DC OPERATING CONDITIONS
(V
CC
= 2.7V to 3.6V, T
A
= -40°C to +85°C.)
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
Supply Voltage V
CC
(Note 1) 2.7 3.3 3.6 V
High-Level Input Voltage
(SDA, SCL, SPRD, PDN, OE)
V
IH
0.7 x
V
CC
V
CC
+
0.3
V
Low-Level Input Voltage
(SDA, SCL SPRD, PDN, OE)
V
IL
-0.3
0.3 x
V
CC
V
DC ELECTRICAL CHARACTERISTICS
(V
CC
= 2.7V to 3.6V, T
A
= -40°C to +85°C.)
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
High-Level Output Voltage (OUT) V
OH
I
OH
= -4mA, V
CC
= min 2.4 V
Low-Level Output Voltage (OUT) V
OL
I
OL
= 4mA 0 0.4 V
V
OL1
3mA sink current 0 0.4
Low-Level Output Voltage (SDA)
V
OL2
6mA sink current 0 0.6
V
High-Level Input Current I
IH
V
CC
= 3.6V 1 μA
Low-Level Input Current I
IL
V
IL
= 0V -1 μA
Supply Current (Active)
I
CC
C
L
= 15pF (output at default frequency) 10 mA
Standby Current (Power-Down) I
CCQ
Power-down mode 10 μA
Voltage Range on V
CC
Relative to Ground ..........-0.5V to +6.0V
Voltage Range on SPRD, PDN, OE, SDA, and SCL
Relative to Ground* ..................................-0.5 to (V
CC
+ 0.5V)
Continuous Power Dissipation (T
A
= +70°C)
μSOP (derate 4.5mW/°C above +70°C)........................362mW
Operating Temperature Range ...........................-40°C to +85°C
Programming Temperature Range .........................0°C to +70°C
Junction Temperature......................................................+150°C
Storage Temperature Range .............................-55°C to +150°C
Soldering Temperature (reflow)
Lead(Pb)-free................................................................+260°C
Containing lead(Pb) ......................................................+240°C
*
This voltage must not exceed 6.0V.