Getting Started Guide for LX9 and Nexys3 User Manual
Analog Essentials
 Getting Started Guide 
2 
For LX9 and Nexys-3 
Analog Essentials Collection modules 
The table below lists the peripheral modules included in the collection, along with a description and interface type.  
Part  
Functionality 
Interface 
DS1086LPMB1# 
I
2
C spread-spectrum EconOscillator™ 
I
2
C 
DS3231MPMB1# 
I
2
C real-time clock 
I
2
C 
MAX3232PMB1# 
RS-232 transceiver 
UART 
MAX4824PMB1# 
Octal relay driver 
GPIO 
MAX5216PMB1# 
High-performance 16-bit DAC 
SPI/GPIO 
MAX5487PMB1# 
Dual 256-tap digital potentiometer 
SPI 
MAX5825PMB1# 
Octal 12-bit DAC 
I
2
C 
MAX7304PMB1# 
16-port GPIO and LED driver 
I
2
C 
MAX9611PMB1# 
Current-sense amplifier with op amp and ADC 
I
2
C 
MAX11205PMB1# 
16-bit delta-sigma ADC with 2-wire interface 
GPIO 
MAX14840PMB1# 
RS-485 transceiver 
UART/GPIO 
MAX14850PMB1# 
6-channel, 600V galvanic isolator 
SPI/UART 
MAX31723PMB1# 
Digital thermometer 
SPI 
MAX31855PMB1# 
Thermocouple-to-digital converter 
SPI 
MAX44000PMB1# 
Ambient light and proximity sensor 
I
2
C 
Included Files 
The top level of the hardware design is a Xilinx ISE® Project Navigator Project (.xise) for Xilinx ISE version 13.4. The 
Verilog-based HDL design instantiates the Microblaze™ core, the support hardware required to run the Microblaze, and 
the peripherals (I
2
C, SPI, GPIO, and UART) which interface to the Pmod ports. This is supplied as a Xilinx software 
development kit (SDK) project which includes a demonstration software application to evaluate each module’s 
functionality. The lower level c-code driver routines are portable to the user’s own software projects. 
Prerequisites 
•  Xilinx ISE13.4 or a later version must be installed on the development PC, along with a license for Xilinx EDK/SDK. 
•  To modify the FPGA code or the software, the user should have a basic understanding of Xilinx Project Navigator 
(ISE) development tools, I
2
C, SPI, GPIO buses, ANSI C, and (ideally) the Xilinx Embedded Development Kit toolset. 
•  Maxim Analog Essential Project Source (downloadable from 
www.maxim-ic.com/FPGA-modules) 
•  One or more of the peripheral modules boards in the Analog Essentials collection. 










