Getting Started Guide for LX9 and Nexys3 User Manual

Analog Essentials Getting Started Guide
16
For LX9 and Nexys-3
c. [ Nexys-3. See above for LX9] This will bring up the linker script menu as shown below.
From this window the code, data, heap/stack section placement can be chosen. For the application
demonstration, this should be set to Digilent_Shared_Mem_Bus_Max_PSRAM_BASEADDR.
d. Clicking Generate will rebuild the (.elf) file with the memory locations set to the external PSRAM
memory.